3M 80 contact spray adhesive specially designed for PVC, vinyl and plastics

  • High performance and resistant to plasticizers
  • Holds up to 93°C
  • Ideal for bonding PVC
  • Available in a 500 ml can

Quote

Close

Overview

          Characteristics of 3M 80 Contact Adhesive Spray

    PVC/vinyl and rubber are two soft materials that are difficult to bond, often presenting challenges for our clients.

    ADEZIF offers various types of adhesives: in pots or in spray form under the reference 3M 80 from the Scotch-Weld range by 3M.

    Made from neoprene, it is called "contact adhesive" because, unlike other spray adhesives, once the assembly is completed, the pieces cannot be readjusted.

     

    Main Characteristics:

    • Excellent resistance to plasticizers: allows for bonding on PVC or vinyl.

    • Quick-setting contact adhesive for fast, durable performance and a permanent bond.

    • Excellent temperature stability up to 93°C: among 3M's aerosol adhesives, it has the best heat resistance. For stability up to 150°C, consult the data sheet for the 3M pot contact adhesive.

    • Excellent adhesion to various materials:

      • PVC, soft or rigid vinyl

      • Numerous plastics: solid polystyrene, PU foam, vinyl foam. For plastics like PE and PP, the 3M 90 spray adhesive is ideal!

      • Rubber (except EPDM - ethylene propylene diene monomer)

      • Metal

      • Wood

      • Leather: genuine leather and synthetic leather like skai

    • Outstanding resistance to environmental conditions and static stress.

     

    Application Method:

    • Double bonding is required: the following section provides tips for application.

    • Spray in lacing patterns with a fixed-flow nozzle, producing minimal spray mist, which is advantageous.

          Examples of Applications

    • Bonding rigid PVC to rigid PVC

    • Attaching rubber insulation materials to pipes

    • Bonding stainless steel panels and metal stiffeners

    • Repairing pool covers

    • Repairing rubber or vinyl materials

    • Fixing materials for sealing or draft excluders

    If your application does not match any of the examples mentioned, other 3M aerosols can surely address your needs (bonding foam, fixing PP or PE plastics, assembling fabric, adhering/removing/reapplying as needed, etc.). Feel free to consult us.

          Tips for Proper Use

    • Shake the spray can before use.

    • As stated earlier, both substrates must be individually coated with enough time for solvent evaporation. As long as the adhesive sticks to your finger, evaporation is not complete. The drying time is approximately 3 minutes, and assembly must occur between 3 and 30 minutes maximum.

    • Once drying is complete, the two substrates are bonded immediately and permanently.

    • Remember to purge the aerosol after use: turn the can upside down and spray until no adhesive comes out of the nozzle.

    • The safety data sheet can be accessed at www.quickfds.com.

          Technical data

    Technical InformationDetails
    ColorPale yellow, hazy
    Volume500 ml
    Adhesive BaseNeoprene
    Spray TypeLacing spray
    Working Time4 to 15 minutes
    Temperature StabilityUp to 93°C
    Bonding TypeDouble bonding
    Solid Content25%