Cyberbond CB 9090 adhesive accelerator for cyanoacrylate applications
- Accelerates the curing of cyano adhesives
- For challenging conditions: dry air, cold, gaps, inactive materials
- Before or after adhesive application
- 100 ml bottle / 200 ml aerosol
Quote
Close
Get a quick quote from ADEZIF
Would you tell us more ?
Step 2/2
backThank you !
You request has been sent.
We promise to respond to you in detail within 24 hours.
In the meantime, feel free to browse our other products.
Description of Cyberbond CB9090 cyanoacrylate adhesive activator
The Cyberbond CB 9090 is an activator that speeds up the polymerization of cyanoacrylate adhesives in various situations:
In unfavorable climatic conditions (dry air, cold)
In cases where there are significant gaps to fill
When bonding inactive materials
The CB9090 can be applied in two different ways:
Pre-application: Apply the product to one of the surfaces to be bonded and allow it to evaporate. Then, apply the cyanoacrylate adhesive to the other surface, quickly assemble the two parts, and let them cure.
Post-application: Using an appropriate spray bottle, mist a small amount of the product onto the surface coated with uncured adhesive and allow it to fully cure.
Precautions for using Cyberbond 9090 activator
For a smoother adhesive surface, spray the CB9090 product from an appropriate distance of about 30 cm.
Keep it in the original closed container to prevent solvent evaporation.
Note that, unless otherwise specified, an activator does not replace the use of a primer.
The activator may affect painted surfaces and thermoplastic materials.
Technical data
Technical Information | Details |
---|---|
Color | Transparent |
Capacity | Bottle of 100 ml / Aerosol of 200 ml |
Chemical base | Aliphatic hydrocarbons, acetone, ionic starter agent, propane/butane (propellant) |
Density at 20°C | 0.705 g/cm³ |
Consistency | Liquid |
Drying time | 10 to 30 seconds |