Bostik Born2Bond Repair Two-Part Instant Glue: Impact-Resistant Adhesive

  • Drillable and sandable
  • Fills gaps
  • High bonding strength
  • Shock-resistant and multi-substrate

Quote

Close

Get a quick quote from ADEZIF
Would you tell us more ?
Step 2/2 back

Adezif collects this information in order to contact you. It is intended for the exclusive use of the company Adezif. We undertake never to resell it to third parties. See our legal notice.

Thank you !

You request has been sent.

We promise to respond to you in detail within 24 hours.

In the meantime, feel free to browse our other products.

      Description of Bostik Born2Bond Repair Instant Adhesive

The Born2Bond Repair adhesive from Bostik is designed for gap filling and instant repairs. It offers excellent adhesion to a wide range of materials and surfaces. Ideal for instant bonding and repairs, it combines the strength of a structural adhesive with the speed of an instant adhesive. Available in gel form, it cures into a robust polymer in less than 10 minutes. Its consistency allows for precise application, even vertically.

 

Characteristics:

  • Open Time: 4 to 10 minutes

  • Curing Time: Hardens in 5 to 10 minutes

  • Instant Adhesion: High bonding performance

  • Low Volume Shrinkage: 4.3%

  • Fills Large Gaps

  • Adhesion to a Variety of Materials

  • Machinable, Sandable, and Paintable: Once cured

  • Shock Resistant

  • Gel Consistency: For controlled and precise application

  • No Dripping: Suitable for vertical application

      Applications of Bostik Repair Adhesive

Typical Industrial Applications:

  • Industrial and Automotive Maintenance

  • Wood Repair and Reconstruction

  • Adhering Leather and Rubber Seals

  • Assembly of Shoes, Toys, Sporting Equipment

  • Sealing Joints in Automotive Applications

  • Plastic Repairs

 

Instructions for Use:

  1. Mixing: Combine parts A and B.

    • The product can be applied directly from the syringe using the provided piston and recommended mixing nozzle.

  2. Preparation: Hold the syringe vertically and insert the piston.

    • While maintaining the syringe upright, remove the cap, attach the mixing nozzle, and begin dispensing the adhesive until all bubbles in the smaller component have been eliminated.

  3. Dispensing: Dispense a cord as long as the mixing nozzle to ensure sufficient mixing.

  4. Application: Apply the mixed adhesive to one of the surfaces to be joined.

    • Assemble the parts immediately after applying the mixed adhesive.

    • Hold the assemblies in place with fixtures or clamps until the adhesive has cured. Avoid movement during curing.

    • Allow the adhesive to reach its full strength before subjecting it to any service load (typically 24 hours).

      Compatible Materials

This table shows the compatibility of Born2Bond REPAIR with key substrates:

MaterialCompatibility
ABS (Acrylonitrile Butadiene Styrene)+++
PC (Polycarbonate)+++
PC/ABS (PC and ABS Blend)+++
PE (Polyethylene) - With Primer++
PMMA (Polymethyl Methacrylate)+++
PP (Polypropylene) - With Primer++
PO (Polypropylene Oxide) - With Primer++
PS (Polystyrene)+
PS (Polystyrene) - With Primer+++
PU (Polyurethane)++
PVC (Polyvinyl Chloride)+++
TPU (Thermoplastic Polyurethane) - With Primer++
AL (Aluminum)++
AL Coating (Anodized or Powder-Coated Aluminum)++
GL (Glass)++
Si (Silicone) - With Primer++
SUS (Stainless Steel)+++
Mild Steel+++
GBMS (Blasted Mild Steel)+++

Compatibility Legend: + Moderate / ++ Good / +++ Excellent

      Technical Data for Bostik Born2Bond Repair

Technical Data Sheet and Safety Data Sheet are available upon request.

 BOSTIK BORN2BOND REPAIR
Chemical BaseEthyl Cyanoacrylate
Viscosity

Part A: 130,000 to 180,000 cP

Part B: 70,000 to 130,000 cP

Open Time4 to 10 minutes
Curing Time15 to 60 seconds (depending on gap and substrate)
Bond Strength on Blasted Mild Steel14 MPa
ColorWhitish
Temperature Range-40 °C to +80 °C
Gap Filling CapacityCentimeters
VolumeSyringes: 10 g or 50 g